--------------------------------------------------------------------------
Setup hints for using BGFAX with the ZyXEL/FD 2.12                01-01-95
B.J. Guillot
FidoNet 1:106/400                         InterNet: bjg90783@jetson.uh.edu
--------------------------------------------------------------------------

All FD*.TXT files are good for both FD 2.12/SW and FD 2.20/ML.  One note
is needed for FD 2.20/ML: [FDSETUP] Modem -> Fax -> Internal = "NO".

Here is the relevant information from FDSETUP ...

[FDSETUP] Modem -> Default Settings -> Command Strings
  Init-1 ... ATZ|
  Init-2 ... AT#P713 555 1212|
  Init-3 ... AT#B1+FCLASS=6|

  #b1+fclass=6             enables fax mode operation
  #p713 555 1212           sets your FAX ID, up to 20 characters

[FDSETUP] Modem -> Default Settings -> Answer control
  Manual answer    Yes
  Force answer ... ATA|
  Answer delay ... 2

Note that the Answer delay should be modified if you are using Caller ID.

[FDSETUP] Mailer -> Errorlevels
  Fax ... 255

[FDSETUP] Modem -> Default Settings -> Messages
   Fax ... CONNECT FAX

@echo off
c:
cd\fd
fd
if errorlevel 255 goto fax
if errorlevel 103 maint.bat
if errorlevel 102 toss.bat
if errorlevel 101 local.bat
if errorlevel 100 dobbs.bat
goto end
:fax
  rem ---1 is for com1 and z is for zfax format
  bgfax /fax c:\bgfax 1 z
  rem ---if /fax gives you problems, try using /fzyx
  fdrun.bat
:end

==========================================================================

Regards,
B.J. Guillot

