64NT3520.ZIP - ATI Technologies Inc.

*****************************

1.0     Introduction
2.0     Installation Notes

*****************************

1.0     Introduction

This ZIP file contains the latest ATI Windows NT 3.5.1 mach64 enhanced display 
driver. Do NOT use this driver with NT 3.5.

*****************************

2.0     Installation Notes

1. Ensure that you have a copy of PKUNZIP.EXE, v1.10 or later.  PKUNZIP is 
available on most BBS and information services, including the ATI BBS and 
CompuServe.

2. Start Windows NT. 

3. Start a MS DOS prompt.

4. Unzip 64NT3520.ZIP into a temporary directory on your hard disk.  For 
example:

MD \ATITEMP
PKUNZIP 64NT3520.ZIP \ATITEMP

5. Exit the MS DOS prompt, and return to the Windows NT desktop.

6. Run the Windows NT Display program located in the Control Panel, Main
   group.

7. Select Change Display Type.

8. Select Change... from the display options.

9. Select Other...

10. NT will prompt you for the correct path, enter C:\ATITEMP where     
    C:\ATITEMP is the drive containing the unzipped contents of   
    64NT3520.ZIP.

11. A list of all Graphics Accelerator drivers will appears, select
    ATI Compatible Driver.

12. Restart Windows NT.  Windows NT will start up using the mach64 drivers.

13. NT Will boot into 640x480 mode and start the Display applet allowing
    for mode selection.

Note: If you select a color depth or resolution, not supported by your
      card, NT will substitute 640x480, 256 color for the display.


14. Once the driver has been installed, you can delete the contents of the 
temporary directory (DEL \ATITEMP\*.*) and delete the directory itself (RD 
\ATITEMP).  

15. We recommend that you keep a copy of the ZIP file, 64NT3520.ZIP, in 
case you need to install the driver again.      

