                           Jasc ImageCommander 2.00


                  Fees for Distribution of Shareware Versions

Disk Vendors, Shareware Distributors and BBS(s) may have charged a nominal
fee for the distribution of this Shareware version of Jasc ImageCommander.
This fee does not constitute payment for the Licensed version of Jasc
ImageCommander, and does not entitle the end user to use the shareware
version for longer than the 30 day evaluation period.


                           Definition of Shareware

Shareware distribution gives users a chance to try software before buying
it. If you try a Shareware program and continue using it, you are required
to register it (or purchase the licensed version as in the case of Jasc
ImageCommander).

Copyright laws apply to both Shareware and retail software, and the
copyright holder retains all rights, with a few specific exceptions as
stated below. Shareware authors are accomplished programmers, just like
retail authors, and the programs are of comparable quality. (In both cases,
there are good programs and bad ones!) The main difference is in the method
of distribution. The author specifically grants the right to copy and
distribute the software, either to all and sundry or to a specific group.
For example, some authors require written permission before a commercial
disk vendor may copy their Shareware.

Shareware is a distribution method, not a type of software. You should find
software that suits your needs and pocketbook, whether it's retail or
Shareware. The Shareware system makes fitting your needs easier, because you
can try before you buy. And because the overhead is lower, prices are lower
also. Shareware has the ultimate money-back guarantee -- if you don't use
the product, you don't pay for it.


                            ASP Ombudsman Policy

This program is produced by a member of the Association of Shareware
Professionals (ASP).  ASP wants to make sure that the shareware principle
works for you. If you are unable to resolve a shareware-related problem with
an ASP member by contacting the member directly, ASP may be able to help.
The ASP Ombudsman can help you resolve a dispute or problem with an ASP
member, but does not provide technical support for members' products. Please
write to the ASP Ombudsman at 545 Grover Road, Muskegon, MI 49442-9427 or
send a CompuServe message via CompuServe Mail to ASP Ombudsman 70007,3536



                   LIMITED WARRANTY AND DISCLAIMER OF WARRANTY 
 
	THIS SOFTWARE AND ACCOMPANYING WRITTEN MATERIALS 
(INCLUDING INSTRUCTIONS FOR USE) ARE PROVIDES "AS IS" WITHOUT 
WARRANTY OF ANY KIND. FURTHER, JASC, INC.(JASC) DOES NOT 
WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING 
THE USE, OR THE RESULTS OF USE, OF THE SOFTWARE OR WRITTEN 
MATERIALS IN TERMS OF CORRECTNESS, ACCURACY, RELIABILITY, 
CURRENTNESS, OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS 
AND PERFORMANCE OF THE SOFTWARE IS ASSUMED BY YOU. IF THE 
SOFTWARE OR WRITTEN MATERIALS ARE DEFECTIVE YOU, AND NOT JASC 
OR ITS DEALERS, DISTRIBUTORS, AGENTS, OR EMPLOYEES, ASSUME THE 
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION.
 
	THE ABOVE IS THE ONLY WARRANTY OF ANY KIND, EITHER 
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE, THAT IS MADE BY JASC, ON THIS JASC PRODUCT. NO ORAL OR 
WRITTEN INFORMATION OR ADVICE GIVEN BY JASC, ITS DEALERS, 
DISTRIBUTORS, AGENTS OR EMPLOYEES SHALL CREATE A WARRANTY OR 
IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY AND YOU MAY 
NOT RELY ON ANY SUCH INFORMATION OR ADVICE. YOU MAY HAVE 
OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
 
	NEITHER JASC NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE 
CREATION,  PRODUCTION OR DELIVERY OF THIS PRODUCT SHALL BE 
LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL 
DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, 
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE 
LIKE) ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT 
EVEN IF JASC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
 
        This Limited Warranty shall be governed and construed in
accordance with the laws of the State of Minnesota.


                           ACKNOWLEDGMENT
 
BY USING THE SHAREWARE VERSION OF JASC IMAGECOMMANDER YOU 
ACKNOWLEDGE THAT YOU HAVE READ THIS LIMITED WARRANTY, 
UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS' TERMS AND 
CONDITIONS. YOU ALSO AGREE THAT THE LIMITED WARRANTY IS THE 
COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN THE 
PARTIES AND SUPERSEDE ALL PROPOSALS OR PRIOR AGREEMENTS, ORAL 
OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN THE PARTIES 
RELATING TO THE SUBJECT MATTER OF THE LIMITED WARRANTY. 

JASC, INC. HAS SECURED AN AGREEMENT WITH UNISYS TO USE THEIR 
PATENTED LZW COMPRESSION TECHNOLOGY IN THE TIFF AND GIF IMAGE 
FILE FORMATS. THIS AGREEMENT COVERS BOTH THE SHAREWARE AND 
LICENSED VERSIONS OF JASC PRODUCTS. BY USING JASC PRODUCTS YOU 
ARE ASSURED OF BEING IN COMPLIANCE WITH UNISYS' LZW PATENT.

OUR AGREEMENT WITH UNISYS REQUIRES THE FOLLOWING STATEMENT 
TO BE INCLUDED WITH ALL SHAREWARE VERSIONS. PLEASE NOTE THAT 
ALTHOUGH PARAGRAPH 2 STATES THAT OUR PRODUCTS CAN NOT BE 
USED FROM A NETWORK SERVER, THE AGREEMENT THAT JASC HAS 
SECURED WITH UNISYS WILL (I REPEAT, WILL) ALLOW YOU TO OPERATE 
THE LICENSED VERSION ON YOUR NETWORK SERVER PROVIDED YOU 
HAVE PURCHASED A SITE LICENSE.

Use of this software is permitted only to the extent reasonably required
to determine whether to purchase the software.

After payment is made, use of this software is limited to use on only a
single personal computer or workstation which is not used as a server.  An
additional payment is required for each use on another personal computer or
workstation.

Only a single copy may be made of this software solely for backup or
archival purposes. The software may also be transferred to a single hard
disk.

Any use of this software in violation of the above is not licensed.

For information concerning licensing the LZW compression and/or
decompression capability, please contact:

			   Unisys Corporation
			   Welch Licensing Department - C1SW19
			   Township Line & Union Meeting Roads
			   P.O. Box 500
			   Blue Bell, Pennsylvania 19424


                       Installing Jasc ImageCommander

Before you can use Jasc ImageCommander you have to run the Jasc
ImageCommander setup program from Windows so it will work properly on your
computer. You cannot just copy the files from the Jasc ImageCommander disk
to your hard disk.  The files on the distribution disks are compressed to
save space. The setup program unpacks those files and builds them on your
working disk.

Under Windows 95 or Windows NT 4.0, follow these steps for installation:

 1) If Windows isn't running, start it now.
 2) If installing from diskette, insert the Jasc ImageCommander disk 1 into
    the appropriate floppy drive.
 3) Click on the Start button on the Taskbar. Windows will open the Start
    menu.
 4) Click on the Start menu's "Run" selection. Windows will open the "Run"
    dialog box.
 5) If installing from a floppy drive type the drive letter of the floppy
    drive containing the Jasc ImageCommander files followed by ":\SETUP.EXE",
    or if you have downloaded Jasc ImageCommander, type the path to the
    unzipped files followed by "\SETUP.EXE".
 6) Click on the "OK" button. Windows will run the Jasc ImageCommander setup 
    program.
 7) Follow the on-screen prompts to complete the installation.

Under Windows 3.1 (with Win32s) or Windows NT 3.51, follow these steps for 
installation:

 1) If Windows isn't running, start it now.
 2) If installing from diskette, insert the Jasc ImageCommander disk 1 into
    the appropriate floppy drive.
 3) From Program Manager, open the File menu and select the Run command.
 4) If installing from a floppy drive type the drive letter of the floppy
    drive containing the Jasc ImageCommander files followed by ":\SETUP.EXE",
    or if you have downloaded Jasc ImageCommander, type the path to the
    unzipped files followed by "\SETUP.EXE".
 5) Click on the "OK" button. Windows will run the Jasc ImageCommander setup 
    program.
 6) Follow the on-screen prompts to complete the installation.

NOTE: In order to use Jasc ImageCommander under Windows 3.1, you MUST 
have Win32s version 1.3 or newer installed.  This file can be obtained from 
Microsoft, as well as from the JASC web site.


                            The User's Manual

In order to keep the size of the Shareware version of Jasc ImageCommander
reasonable, no printable user's manual has been provided. You will find that
help for ALL menu items and associated dialog boxes, along with general
information, is provided in the online help system.

When you purchase the licensed version of Jasc ImageCommander you will
receive the fully illustrated, perfect bound User's Guide.


                            Technical Support

Technical support for Jasc ImageCommander can be obtained from:

USA
---------
JASC, Inc.
PO Box 44997
Eden Prairie, MN 55344 USA
Voice:		(612) 930-9171 (8am to 6pm USA central time)
Fax:		(612) 930-9172
CIS:		Go Jasc
Internet:	techsup@jasc.com

England
------------------------
Digital Workshop
19 Parsons Street
Banbury, OXON
OX16 8LY, England
Voice:
    Orders	+44 1295 258335
    Tech Sup	+44 1295 273476
Fax:		+44 1295 254590
CIS:		74431,1160

Deutschland
-----------
Redaktionsburo Lakies
Holger Lakies
Dobro 14
29479 Jameln
Germany
Voice:		+49 05864-1328
Fax:		+49 05864-1312
CIS:		70007,5504

Japan
-----
Personal Data Factory
Shimoueki-cho 451-3,
Isesaki-shi, Gunma-ken
372 Japan
Voice:		+81 270 21 1423
Fax:		+81 270 26 1636
CIS:		101153,21


                             Distributing

You are encouraged to pass a copy of the shareware version of Jasc
ImageCommander along to your friends for evaluation.

If you do so, you must provide them with the entire set of Jasc
ImageCommander shareware version files. These include:

SETUP.EXE
SETUP.W02
README.TXT
VENDOR.DOC
FILE_ID.DIZ

Do not simply copy the files off your hard drive. Jasc ImageCommander
must be installed using the SETUP program or it will not function correctly!

If you intend to charge for distribution, you must adhere to the
requirements of the VENDOR.DOC file.


                       Purchasing the Licensed Version

You may use the shareware version of Jasc ImageCommander for a 30 day trial
period.  If you would like to continue to use Jasc ImageCommander after the
30 day trial period, you are required to purchase the licensed version of
Jasc ImageCommander.

When you purchase Jasc ImageCommander you will receive the latest licensed
version and the printed user's guide.

Jasc ImageCommander may be purchased from a number of sources.

To obtain the listing of vendors, and print an order form:
1. Start Jasc ImageCommander.
2. At the shareware startup screen press the "Order Jasc ImageCommander"
   button.
3. Once the distributor page is shown click the left mouse button on the
   vendor of your choice.
4. Click the Print button in the Help System if you wish to print the
   order form.

