README.TXT
----------
WorldTime for Windows(TM)
Version 3.00

This file contains program notes and feature summaries.

Full program documentation is provided in the WorldTime help
file (WTIME30.HLP), which is accessed via the program's system
menu "Help" command.

This file is divided into the following sections:

 1. OVERVIEW
 2. PROGRAM FILES
 3. INSTALLATION & CONFIGURATION
 4. NOTES FOR USERS OF PREVIOUS VERSIONS
 5. NOTES FOR USE ON A NETWORK
 6. LIMITED WARRANTY AND REMEDIES
 7. WORLDTIME EXTENSIONS
 8. WORLDTIME SCREEN SAVER
 9. REGISTRATION INFORMATION
10. SITE LICENSE REGISTRATION
11. VERSION UPGRADE ORDERS



1. OVERVIEW
-----------
WorldTime 3.0 is an easy to use international clock utility for
the Microsoft(R) Windows(TM) operating environment.

WorldTime can display the current time and date at locations
selected from a database of over 190 metropolitan and geographic
sites worldwide.  Custom sites can also be defined and used in
place of any of the default locations.

The program supports local and international daylight savings
time policies, as well as half-hour time zones.  The program
also features ten independent alarms, which can be easily set
and linked to the date and time of any assigned location.

WorldTime 3.0 is a 16-bit Windows application that will run
under any version of 16-bit or 32-bit Windows (i.e., Windows
3.1, Windows 3.11, Windows for Workgroups, Windows NT, and
Windows 95 or later).



2. PROGRAM FILES
----------------
The following program files are included in this release:

    WTIME30.EXE   Program executable file
    WTIME30.HLP   Program help system file
    WTCALC.DLL    Program support library
    README.TXT    ASCII text program documentation

All files should be copied to the same directory on the user's
hard disk or an accessible local or network hard disk.

NOTE: If the WorldTime Extensions are to be used, the
extensions module (WT30EXT.EXE) must be copied to the same
directory as the main program files.

An additional file, WTIME30.INI, is automatically created when
the program is first run.  By default, this file is located and
maintained in the user's default Windows directory (e.g.,
C:\WINDOWS or C:\WIN).



3. INSTALLATION & CONFIGURATION
-------------------------------
Depending on the version of WorldTime you have, an installation
utility may have created a directory on your hard drive
(e.g., C:\WTIME30) and copied the required program files to that
location.

If no such utility was provided, please follow these steps:

1) Create a destination directory on your hard disk
   (e.g., C:\WTIME30) using Windows File Manager or Explorer,
   or the MS-DOS "MD" (make directory) command as in the following
   sample command line...

   MD C:\WTIME30

2) Copy all of the WorldTime program files from their source
   drive/directory to the destination drive/directory using
   File Manager or Explorer, or the MS-DOS "COPY" command as in
   the following sample command line...

   COPY A:\*.* C:\WTIME30

   If your WorldTime files are contained in a compressed 'ZIP'
   archive, copy the ZIP file to the destination directory and
   then un-ZIP the file with PKUNZIP or comparable decompression
   utility as in the following sample command line...

   PKUNZIP C:\WTIME30\WTIME30.ZIP

3) WorldTime is started by running the WTIME30.EXE file.  You
   can run WTIME30.EXE from File Manager or Explorer, or by
   assigning a Program Manager icon (or Windows 95 TaskBar Start
   Menu item) to WTIME30.EXE.  Please refer to your Windows
   Users Guide for instructions.

Once WorldTime is running, general (local) settings may be
modified from WorldTime's Configuration dialog, which is
accessed via the system menu "Configuration..." command.

NOTE: For users new to Microsoft Windows, the system menu is
accessed by "single-clicking" on the small icon in the
upper-left corner of the WorldTime window.

From the Configuration dialog, users must make sure the correct
local time zone is selected in the "Local Time Zone" listbox
control.

In addition, the "Local Daylight Savings Time / Summer Time" and
"Local Half-Hour Time Zone" checkbox controls should be checked
or cleared to reflect the presence or absence of an active local
DST / Summer Time policy or half-hour time zone policy.

IMPORTANT: The Configuration dialog box settings MUST be correct
in order for WorldTime to function accurately.



4. NOTES FOR USERS OF PREVIOUS VERSIONS
---------------------------------------
It is not recommended that program files from different versions
of WorldTime be stored in the same directory.  If you own a
previous version of WorldTime, you should remove it before
installing the new version or install the new version in a
separate directory.

The first time WorldTime 3.0 is run, it will attempt to locate
the initialization (INI) file(s) used by previous releases.  If
such a file is located, the program will attempt to convert
your existing configuration settings to the format used by
WorldTime 3.0.  Even so, you should always open the
Configuration dialog and review its settings as soon as the
program is run.

Depending on the version of WorldTime you used previously, the
design of WorldTime 3.0's interface may seem very unfamiliar.
To acquaint yourself with the new interface, please refer to
the help file topic "The WorldTime Interface".  WorldTime's help
system is accessed via the system menu "Help" command or via the
F1 key.



5. NOTES FOR USE ON A NETWORK
-----------------------------
WorldTime features a flexible INI file handling protocol that
lends itself particularly well to use of the program on a LAN.

Normally, the WTIME30.INI initialization file (containing all
configuration settings) is maintained in the default Windows
directory of the user's host system.

Two command-line switches are available for overriding this
default.

The /L switch is used for forcing WorldTime to maintain the
WTIME30.INI file in its local or "home" directory (e.g., the
directory in which WTIME30.EXE is located).  The /L switch
takes the following form...

	WTIME30.EXE /L

The /I switch is used for specifying a particular location for
the WTIME30.INI file (i.e., a directory other than the local
directory or the user's default Windows directory.  The /I
switch is followed by an equals sign (=) and the drive and
directory path to the WTIME30.INI file.  The /I switch takes
the following form...

	WTIME30.EXE /I=d:\initbin

In this example, WorldTime will maintain its WTIME30.INI file
on the D: drive, in the \INITBIN directory.

IMPORTANT: Use the /I switch with caution.  If the drive or
directory does not exist or the path is entered incorrectly,
WorldTime will revert to maintaining WTIME30.INI in the user's
Windows directory.

You may use upper- or lower-case characters in a command line
switch.

NOTE: Users can always verify WTIME30.INI's location by
accessing the "About WorldTime..." dialog box.  At the bottom
of the dialog, a status line is displayed which reflects the
WTIME30.INI file's full pathname.

Please refer to the WorldTime help file for full information
about WorldTime's use in a network environment.



6. LIMITED WARRANTY AND REMEDIES
--------------------------------
Before release, our applications software is tested on a wide
variety of hardware configurations, under the most rigorous test
conditions possible.  We therefore warrant that the software
will perform in substantial compliance with the specifications
set forth in this text, provided that the software is used on
the computer hardware and operating system(s) for which it was
designed.

Neither the author nor Pegasus Development make any other
warranties, expressed or implied, with respect to this software,
including its quality or fitness for a particular purpose.

In no event will the author or Pegasus Development be liable for
any direct, indirect, special, incidental, or consequential
damages arising from the use of or the inability to use this
software, even if the author or Pegasus Development has been
advised of the possibility of such damages.

Neither the author nor Pegasus Development is responsible for
any costs including, but not limited to, those incurred as a
result of lost profits or revenues, loss of time or use of the
software, loss of data, the cost of recovering software or data,
the cost of substitute software, claims by third parties, or
similar costs.



7. WORLDTIME EXTENSIONS
-----------------------
The WorldTime Extensions Pack includes an extensions module
(WT30EXE.EXE) that provides enhanced features to WorldTime's
alarm functions (automated task launching, waveform audio
support, "smart" notification dialogs, etc.).

The Extensions Pack also includes the WorldTime Screen Saver.
Please refer to section 8 for information about screen saver
installation and use.

To install the extensions module, simply copy WT30EXT.EXE
into your default WorldTime directory (i.e., the directory
where WTIME30.EXE and WTCALC.DLL are located).  WorldTime
will auto-detect WT30EXT.EXE and will then load and enable
the extended alarm functions.

Please refer to the WorldTime help file for documentation
of the program's alarm functions.



8. WORLDTIME SCREEN SAVER
-------------------------
The WorldTime Screen Saver is included in the Extensions Pack.

To use the screen saver, copy WTSAVER.SCR into your default
Windows directory (e.g., C:\WINDOWS).  If you are using
Windows 95, you should copy the file into your Windows System
directory (e.g., C:\WINDOWS\SYSTEM).

The screen saver can be configured and selected for use via
Control Panel (Desktop Properties).

Please refer to the WorldTime help file for more detailed
documentation of the WorldTime Screen Saver.



9. REGISTRATION INFORMATION
---------------------------
This product is distributed as shareware, not freeware, and is
intended for evaluation purposes only.

You are welcome to install and run the shareware version of this
product in order to evaluate its usefulness.  The evaluation
period for this product is limited to 30 days.  If the product
meets your needs and you wish to continue using it beyond the
30-day evaluation period, we ask that you take the time to
register.

The standard registration fee for this product is $20.00 U.S.

The WorldTime Extensions Pack is available for an additional
$10.00 U.S.

The Extensions Pack includes an extensions module that provides
enhanced features to WorldTime's alarm functions (automated task
launching, waveform audio support, etc.).  The Extensions Pack
also includes the WorldTime 3.0 Screen Saver.

Registrations ordered from the U.S. or Canada should include
an additional $2.00 per disk for shipping & handling.  Orders
from outside the U.S. or Canada should include $3.00 for
shipping & handling.

Checks and/or money orders must be drawn on a U.S. bank.

Registrations are handled by Advanced Support Group, Inc.  All
credit card registrations will appear on your statement as
"ASG Software/Services."

Registrations can be ordered by mail, by telephone or fax (with
a major credit card), or by electronic mail.

ASG Order Lines:    1-800-788-0787 or (314) 965-5630

ASG Fax Line:       (314) 966-1833

ASG Electronic Mail
      CompuServe:   76711,1171
      Internet:     76711.1171@compuserve.com

For your convenience, a printable registration form is provided
at the end of this text file and within the program's help file
(accessible via the Windows Help system).  The form can be used
for fax or mail orders.

Orders are normally shipped via standard U.S. mail services
(domestic U.S.).  Overseas orders are normally shipped via air
mail (small packet rate).  For an additional fee, 2-day Priority
Mail and next-day shipping (via Federal Express) is available;
please call for details and shipping rates.

Registration entitles a single end-user to install and run this
program on a single personal computer or work station.  If you
are interested in obtaining a registration for more than one
user, please read the "Site License Registrations" section
below.

Registered users receive the registered version of this
product (shipped on 3.5" disk).

Registration also entitles the user to advance release
information on upcoming Pegasus Development products (including
updates and upgrades to this program) -- as well as other new
titles in our expanding product line.



10. SITE LICENSE REGISTRATIONS
-----------------------------
Site license registrations are available for corporations
wishing to obtain multiple (20 or more) registrations of this
product.  Site licenses allow many users to obtain product
registration at a substantial discount from the standard
registration fee.

Please contact our distributor, Advanced Support Group, Inc.,
for site license information.



11. VERSION UPGRADE ORDERS
--------------------------
If you are a registered user of any previous release of
WorldTime (versions 1.x through 2.x), you are eligible to
order the registered version of WorldTime 3.0 for a
substantial discount -- usually 50% off the standard
registration fee.

For upgrade information, please contact Pegasus Development
via the Advanced Support Group address or telephone/fax
numbers provided.



"Microsoft" and "Windows" are registered trademarks of
Microsoft Corporation.

WORLDTIME FOR WINDOWS(TM)
Copyright (c) 1993,1994,1995 Matthew T. Smith
PEGASUS DEVELOPMENT
ST. LOUIS, MISSOURI


----------------------------------------------------------------

SOFTWARE REGISTRATION FORM
--------------------------
Return this form along with your payment to:

Pegasus Development / ASG
WorldTime 3.0 Registration
11900 Grant Place
St. Louis, MO  63131 U.S.A.

You can also register by telephone using your credit card
through Advanced Support Group's software order lines:
1-800-788-0787 or (314) 965-5630.  FAX registrations (using
a copy of this form) are also accepted; the ASG fax line is
(314) 966-1833.

____ WorldTime Registration(s)         @ $20.00 U.S. each

____ WorldTime Extensions Pack(s)      @ $10.00 U.S. each

For orders from U.S. & Canada, please add $2.00 for
shipping and handling; orders outside the U.S. & Canada,
please add $3.00.

Checks and money orders must be drawn on a U.S. bank.

Total enclosed . . . . . . . . . . . . . . $______________
	
Payment by:  [] Check   [] AmEx    [] MasterCard   [] VISA
	
Card# _______________________________ Exp. Date __________

Signature of Cardholder __________________________________

Name _____________________________________________________

Address 1 ________________________________________________

Address 2 ________________________________________________

City __________________________ State/Province ___________

Zip/Postal Code________________ Country __________________

Telephone (________)______________________________________
