===========================
Windows NT 4.0 Installation
===========================

Step  1. Reboot your system and enter Windows NT 4.0 (VGA) from the Boot
         Manager.

Step  2. Launch Windows NT. Choose Start\Setting\Control Panel\Display.

Step  3. From "Display Properties", select Settings.

Step  4. Click Display Type.

Step  5. Click Change...  .

Step  6. Click Have Disk...  .

Step  7. Insert the release floppy into drive A:\WINNT40.

Step  8. Select OK when ready.

Step  9. From "Display", select WinFast 3D L2200 (Permedia + GLINT Delta).

Step 10. From "Third-party Drivers", select Yes.

Step 11. From "Installing Drivers", select OK.

Step 12. From "Display type", select Close.

Step 13. From "Display Properties", select Close.

Step 14. From "System Settings Change", Select Yes.

Step 15. Select Yes to restart Windows NT 4.0 with the new driver.

============================
Windows NT 3.51 Installation
============================

Step  1. Reboot your system and enter Windows NT 3.51 (VGA) from the Boot
         Manager.

Step  2: Open the "Control Panel" in the Main Program Group and start the
         "Display".

Step  3: Press the "Change Display Type..." button. A new window titled
         "Display Type" will appear.

Step  4: Press the "Change..." button in this window. A window titled
         "Select Device" will appear.

Step  5: Press the "Other..." button in this window. A window titled
         "Install from Disk" will appear.

Step  6: Specify the path A:\WINNT351. Insert the release floppy for your
         machine architecture into the drive and press OK. The "Select Device"
         window will reappear with various options for the WinFast 3D L2200.

Step  7. "Click on the "Install" button from the "Models.

Step  8: A window may appear asking you to confirm that you are changing your
         system configuration. Press "Yes".

Step  9: Press "Continue" in the "Windows NT Setup" window.

Step 10: Two more information windows will appear. Press "OK" in both.

Step 11: If you are upgrading your WinFast 3D L2200 drivers you
         may be asked whether you want to use the "Current" or "New" drivers.
         Select the "New" option.

Step 12: A window titled "Display Settings Change" will appear. Remove the
         release floppy from the drive and press the "Restart Now" option.

=========================
Heidi Driver Installation
=========================

To install the latest version of your GLINT Heidi driver, locate
your 3DStudio Max directory on your hard drive and then enter
the Drivers sub-directory. Rename the file in there 'wglint.hdi'
to 'wglint.bak'. Then copy the new 'wglint.hdi' from this floppy,
to the Drivers directory.

If using WinFast 3D L2200 cards, the best performance can
be achieved through running in 32768 color mode.
