                             README

This disk contains the modem INF file for Windows95, WindowsNT4.0.

Installation

    *Plug&Play modem under Windows95:

        If your modem card is external type, use Windows95's Start button,
        then select Settings/Control Panel/System, under System, select
        Device Manager, then select Refresh button.
        If your modem is internal type, just plug in the modem and power
        on the PC.

        Windows95 will prompt you a new hardware have been found
        and request for driver.

        Please select Driver from manufacture and insert this driver disk.



    *Internal Plug&Play modem under DOS:

        Insert your modem into PC correctly.

        If your PC do not support Plug&Play BIOS, then your modem card
        may not work correctly. Please run setpnp.exe included in this
        disk to set the modem to desired comm port. For more information
        about setpnp.exe please see setpnp.txt.
        


    *Non Plug&Play modem under Windows95 & WindowsNT4.0:

        Insert your modem into PC correctly(internal) or connect to serial
        port of your PC(external).

        Push Windows95's Start button, then select
        Settings/Control Panel/Modem, under Modem, Select Add, then check
        the "Don't auto detect modem,..." and push Next, then select Have a
        disk and push Next.

        Insert the driver disk and follow the steps.


Caution:
    WindowsNT4.0 do not support Plug&Play modem. Please use legacy modem
    instead.
