        #
        | README file for
        |
        | ELSA graphics driver for Windows 2000 build 2195
        |
        | Version: 5.03.05.166
        |
        |      GLoria II
        |
        | Copyright (c) 2000 ELSA AG (Aachen, Germany)
        |
        | ELSA AG                  Internet   : http://www.elsa.de
        | Sonnenweg 11
        | 52070 Aachen
        | Germany
        |
        | ELSA Inc.                Internet   : http://www.elsa.com
        | 1630 Zanker Road
        | San Jose, CA 95112
        | USA
        |
        | ELSA Asia Inc.           Internet   : http://www.elsa.com
        | 7F-11, No. 188, Sec. 5
        | Nanking East Road
        | Taipei 105
        | Taiwan, R. O. C.
        |
        | ELSA Japan Inc.          Internet   : http://www.elsa.com
        | Mita Suzuki Building 3F
        | 5-20-14 Shiba, Minato-ku
        | Tokyo 108-0014
        | Japan
        |
        | 2000-07-28, CBuersch


        1       Driver Description
        2       Installation Instructions
        3       Additional Configuration Options
        4       Known Bugs
        5       Troubleshooting

-------------------------------------------------------------------

1       Driver Description

        Display Driver Version : 5.03.05.166
        OpenGL Driver Version  : 5.03.05.166
        Operating System       : Windows 2000
        Display adapter        : ELSA GLoria II
        Supported Languages    : no limitations

1.1     List of file names (files may be compressed)

        - eglii.cat  (Catalog file)
        - eglii.inf  (Script file for driver installation)
        - egliid.dll (Display driver)
        - egliim.sys (Miniport driver)
        - egliio.dll (OpenGL driver)
        - readme.txt (the file you are reading)
        - \ELSAINFO\ (ELSAINFO directory )
        - \GLSET\    (APPLICATION SETTINGS directory)
        - \GLIIMODE\ (Tool for creating new monitor timings)
-------------------------------------------------------------------

2       Installation instructions

2.1     Preparation

        Note: If there were already other graphics boards
              installed, their referring "oemx.inf" and
              "oemx.pnf" files (where "x" read as numbers) in
              the INF subdirectory of your system have to be
              deleted. This is to ensure that the Plug&Play
              recognition of Windows 2000 is working properly.

        Copy all listed driver files to a formatted disk (or a
        temporary directory). Uninstall all display adapter devices
        under CONTROL PANEL/SYSTEM/HARDWARE/DEVICE MANAGER/DISPLAY
        ADAPTERS. Remove your floppy disk and reboot your system.


2.2     Installation

        Windows 2000 uses Plug&Play functions to recognize your
        display adapter. Here is how:

        1. Device recognized. The "Found New Hardware" wizard
           will guide you.
           - click "Next" - choose option
           "Display a list of the known drivers ..."
           - click "Next"
           - choose "Display Adapters"
           - click "Next"
           - click "Have Disk..."
           - choose the directory from (2.1)
           - click "Ok"
           - choose entry "ELSA GLoria II
           - click "Next"
           - click "Next"
           - click "Yes".
           Now the driver will be installed.
           - click "Finish.

        2. The installtion of the display driver is finished now.
           Remove your floppy disk and reboot your system now.

        Note: Depending on your monitor at the next reboot
              Plug&Play will recognize and install a monitor
              device.

2.3     Verification

        Open CONTROL PANEL/DISPLAY/SETTINGS. Verify that you can
        read "Plug and Play Monitor on ELSA GLoria II".
        You should now be able to use a resolution higher than
        800x600.

2.4     Adjusting Refresh Frequencies

        Click "Advanced" Button on Display Properties Page. Go to
        Monitor Properties Page and use the DropDown-List "Refresh
        Frequency".

-------------------------------------------------------------------

3       Additional Configuration Options

3.1     Additional Tools

3.1.1   ELSA Application Settings

        The ELSA Application Settings allow you to configure the 3D
        options of your ELSA GLoria graphics board. You will find
        this tool as a tab in the display properties.
        You also will find a detailed description by clicking the
        Help key.

3.1.2   ELSA Info

        ELSA Info offers a quick view of all relevant information
        about your hard- and software configuration. First of all,
        this is a diagnostic tool, which should help you in solving
        configuration problems of your graphics system.
        You can redirect all shown information to file or printer.
        The generated output will be helpful in getting quick
        and efficient support from ELSA.

3.1.3   ELSA Settings

        The ELSA Settings utility is not shipped with this driver.
        Read the Known Bugs section for a workaround.

3.2     Stereo function

        This driver provides Stereo functionality in combination
        with Stereo shutterglasses and a stereo capable application.
        To activate the stereo function mark the stereo checkbox 
        in ELSA Application Settings under "Advanced". You will find
        detailed help about creating new Application Settings
        profiles in the Application Settings helpfile.

-------------------------------------------------------------------

4       Known Bugs

        Currently the ELSA Settings utility isn't supported by the
        driver. To create new monitor timings we included a command
        line utility named GLIIMODE.exe to the package. It can be
        found in the Windows folder in the ELSAUTIL subdirectory.
        Start the program with "GLIIMODE /?" for more information.

-------------------------------------------------------------------

5       Troubleshooting