##                   ###           ########
 ## G o l d W a v e ## ##  v3.02  ##
  ##               ##   ##       ##
   ##     ###     ## *** ##     ## *****
    ##   ## ##   ##       ##   ##
     ## ##   ## ##         ## ##
      ###     ###           ### ***** TM


--------------------------------------------------------------
Table of Contents
--------------------------------------------------------------

1.0 GoldWave Features
2.0 Installation, Uninstall
3.0 Important Additional Notes
4.0 Shareware, Copyright & Distribution, Warranty
5.0 Contacting the Author
6.0 Statistics


--------------------------------------------------------------
1.0 GoldWave Features
--------------------------------------------------------------

GoldWave is sound editor, player, recorder, and converter
for MS-Windows.

Features:
  * Supports all MPC sound cards (SB, SB16, PAS16, GUS, ...)
  * Native 8-bit or 16-bit stereo editing
  * Configurable storage: direct to disk or RAM
  * Opens huge files in a 'flash'
  * Multiple resizable sound windows with time axis and
     "Overview" box.
  * Independent left/right channel editing and viewing
  * Detailed zoom to magnify to a sub-sample level for extra
     accurate editing
  * Direct editing with the mouse
  * Standard editing functions: undo, cut, copy, paste,
     trim, mix, delete
  * Intelligent editing that automatically converts
     sampling rates, bits, and channels when copying and
     pasting to different file formats
  * Tool Bars for editing, zooming, opening files, and effects
  * Over 40 bitmapped buttons
  * Status bar with configurable time and range displays
  * Standard effects: echo, volume, reverse, envelope shaping,
     panning, filters, resample, transpose, doppler, distortion,
     noise gate, mechanize, flange, and more...
  * Ability to save paramaters and shapes for effects
  * Detached and resizable Device Controls window with
     dual oscilloscopes, LED meters, and controls
      * Play, pause, stop, rewind, fast forward, record, volume,
         balance, and speed controls
      * Realtime playback during rewind and fast forward
      * Realtime amplitude, spectrum, spectrum bar, or
         spectrogram oscilloscopes
      * Flexibility to choose input/output devices
      * User configurable play control
  * Built in support for WAV, VOC, IFF, AIF, AFC, AU, SND,
     MAT as well as the ability to open RAW files as
     8-bit, 12-bit , 16-bit, mu-Law, A-Law, and IEEE
     floating point
  * Ability to set and describe reference/cue points
  * Expression evaluator for any type of sound generation
     and manipulation
  * CD-ROM controls for playing audio CDs
  * Complete on-line help
  * Shareware, with NO FEATURES DISABLED!


--------------------------------------------------------------
2.0 Installation, Uninstall
--------------------------------------------------------------

2.1) Installation

Use Program Manager to create a new icon for GoldWave.

Copy the following files to your WINDOWS directory:
    express.eqx
    gwpreset.ini

Search your system for the file BWCC.DLL.  If you find any
copies, check the date.  If the BWCC.DLL file included with
GoldWave is newer, replace all old copies with the one
included with GoldWave.  You should restart Windows to remove
any old copies from memory.


2.2) Uninstall

Delete the following files from your WINDOWS directory:
    express.eqx
    gwpreset.ini
    goldwave.ini
Other files are listed in section 4.0.

Generally, BWCC.DLL should not be deleted from the 
WINDOWSS\SYSTEM directory as it may be required by other
applications.


--------------------------------------------------------------
3.0 Important Additional Notes
--------------------------------------------------------------

3.1) GoldWave requires a minimum of a 386 processor.  A 486
processor is recommended.

3.2) VOC files are saved using version 1.20 format.
GoldWave will only use the older VOC format if the sound
is mono 8-bit with a sampling rate less than 23000Hz.
If a VOC file saved by GoldWave becomes incompatible with
your Sound Blaster driver:
    1)	Open the file in GoldWave
    2)	Make sure the sampling rate is less than 23000Hz.
	If it is not, use Effects | Resample to convert
	to a lower sampling rate.
    3)	Use File | Save as to save the file as mono unsigned
	8-bit VOC.
If possible, you should get a copy of the latest Sound
Blaster drivers (ftp.creaf.com).

3.3) GoldWave now makes use of more of the RIFF WAVE
standard file format.  New chunks such as the 'cue ' and
LIST 'adtl' are included to store cue points.  These chunks
are stored at the end of the WAVE file to minimize problems
with some programs that do not correctly read/ignore WAVE
chunks.  Cues are stored only in Wave files.  If you
encounter problems with other programs, report the problem
to the developers of the other program.

3.4) In RAM storage mode, the largest file you can open
depends upon how much RAM you have for Windows.  This does
not include virtual memory.  Use Hard disk mode when
editing large files (Options | File).

3.5) Colour configuration has been removed temporarily.
It will be reintroduced in a future version.

3.6) In order to get the scope working correctly, you might
have to change the positioning method in the Device Setup
dialog box.

3.7) GoldWave includes a recent version of BWCC.DLL
from Borland.  GoldWave checks for this version of BWCC.DLL
(or a newer one).  If you get an error message, you should
delete any older copies of BWCC.DLL or replace them with the
one included with GoldWave.  You may have to restart Windows
to remove the older BWCC.DLL from memory.  Only one copy of
BWCC.DLL is needed and should be kept in your WINDOWS\SYSTEM
directory.

3.8) If GoldWave crashes during playback or recording,
contact your sound card manufacturer to obtain an updated
driver.  Some drivers are available from the World Wide Web.
The GoldWave WWW home page has links to some sound card
manufacturers.

3.9) Updates for GoldWave can be downloaded from the GoldWave
WWW home page:
    http://web.cs.mun.ca/~chris3/goldwave


--------------------------------------------------------------
4.0 Shareware, Copyright & Distribution, Warranty
--------------------------------------------------------------

4.1 Shareware
-------------
GoldWave is a shareware program.  To register and encourage
further development, please follow the directions in the
ORDER.TXT or ORDER.WRI file included with this program.

4.2 Copyright & Distribution
----------------------------
GoldWave v3.02 ("the package") includes the following software
and documentation:
	GOLDWAVE.EXE	GoldWave application file
	GOLDWAVE.HLP	GoldWave help
	EXPRESS.EQX	Evaluator expressions
	GWPRESET.INI    Effects presets and shapes
	ORDER.WRI	Order form (in Write format)
	ORDER.TXT	Order form (in ASCII text format)
	README.TXT	Important notes/information
	WHATSNEW.TXT	A list of new features
	BWCC.DLL	Borland's Windows control library

The package is copyright (C) 1993-1995 by Chris S. Craig.

You may copy and distribute the package through BBS and ftp
sites.  Only the unmodified "zipped" file may be distributed
or copied.
You are prohibited from:
   charging a fee or requesting donations for the package;
   distributing/including the package in commercial products;
   modifying the package.

The package may be distributed on CD-ROM in the case where ftp
sites issue CD-ROMs of their collections.  This includes
SimTel, Garbo, Sound Site, CICA, and other similar large
collections.

All trademarks/registered names acknowledged.

4.3 Warranty
------------
The package is provided as is, without warranty of any kind.
The author shall not be liable for damages of any kind.  Use
of this software indicates you agree to this.


--------------------------------------------------------------
5.0 Contacting the Author
--------------------------------------------------------------

E-mail: chris3@cs.mun.ca
Please refer to the on-line help for further information.


--------------------------------------------------------------
6.0 Statistics
--------------------------------------------------------------

Version 3.00 Statistics
-----------------------
	Compilier:	Borland 4.5, C++
	Environment: 	Microsoft Windows 3.1
	System:		90MHz Pentium
	Total hours:	2418

	Source code:
	    Modules:	47
	    Bytes:	682991	(~30000 lines)

	Documentation (in bytes):
	    Total:	~85000


Version 2.10 Statistics
-----------------------
	Compilier:	Borland 3.1, C++
	Environment: 	Microsoft Windows 3.1
	System:		20MHz 386
	Total hours:	1428

	Source code (in bytes):
		Total	828344	(~30000 lines)

	Documentation (in bytes):
		Total	~150000

Version 2.00 Statistics
-----------------------
	Language:	C++
	Compilier:	Borland 3.1
	Environment: 	Microsoft Windows 3.1
	System:		a slow 20MHz, 386
	Total hours:	1266

	Source code (in bytes):
		 *.CPP	448939
		 *.H	 76850
		 *.RC	192852
		Total	718641	(~26000 lines)

	Documentation (in bytes):
		Total	~140000

Version 1.00 Statistics
-----------------------
	Language:	 C++
	Environment: 	 Microsoft Windows
	Hours required:	 657

	Source code (in bytes):
		 *.CPP	272701	
		 *.H	 48037	
		 *.RC	112669	
		Total	433407	(~15000 lines)

	Documentation (in bytes):
		Total	~90000


--------------------------------------------------------------	 		

Chris Craig
chris3@cs.mun.ca
